HU | EN

VEKOP-2.1.1-15 Vállalatok K+F+I tevékenységének támogatása

Abrasive solutions

With over 60 years of professional experience

  • GRANIT Grinding Wheel Ltd. is the largest manufacturer of quality abrasive tools in Hungary.

Handling and storage

EN 12413 and FEPA Safety Code specify the requirements of handling and storage.

Grinding tools shall be protected from any damage, vibration, moisture, undue warmth causing strength decrease during transportation, handling and storage.  Protect them from deformation, tension, do not knock each other or other object. Abrasive tools shall be stored over +5 °C.

Heavy wheels or packages containing abrasive tools should be lift with suitable crane or hydraulic jack. Do not roll grinding wheels along the floor.

Resin bonded ( B, BF ) grinding tools must be stored under 80% relative humidity.

Resin bonded ( B, BF ) grinding tools can be stored until the  expiry date marked on the wheel or on the label,  or within 3 years from the date of manufacture if the expiry date is not marked. Afterwards the use of expired abrasive tool is dangerous and forbidden.

Abrasive tools should be stored on suitable storage rack or in container.

Plain or recessed wheels without profile:
       Middle size - 100-300 mm outer diameter -  at least 10 mm thickness grinding wheels  should be stored on the edge, secured or on flat surface maximum up to 2D height.
       Large – over 300 mm outer diameter - at least 10 mm thickness grinding wheels  should be stored on the edge, secured so they cannot move.
       Middle size or large wheels under 10 mm thickness grinding wheels  should be stored on flat surface maximum up to 1,5D height.

Plain wheels with profile should be stored on flat surface maximum up to 1,5D height.

Cylinders should be stored on flat surface maximum up to 2D height Use protective spacers.

Cups should be stored on flat surface maximum up to 4D height.

Dishes should be stored on flat surface maximum up to 2D height. Use protective spacers.

Glass fibre reinforced flat cutting-off wheels should be stored on flat surface maximum up to 2D height. Use metal plate separator on every 0,5 D height, or store in the original packages.

Glass fibre reinforced depressed centre cutting-off or grinding wheels should be stored on the edge, secured so they cannot move or store in the original packages.

Glass fibre reinforced flat cutting-off wheels should be stored on flat surface maximum up to 2D height. Use metal plate separator on every 0,5 D height, or store in the original packages.

Glass fibre reinforced depressed centre cutting-off or grinding wheels should be stored on the edge, secured so they cannot move or store in the original packages.

Miért a GRANITot válassza?

Magas minőség

Minőségi alapanyagok felhasználásával, korszerű technológiával, szigorú minőségellenőrzési és biztonsági előírásoknak megfelelően gyártjuk termékeinket.

Kedvező ár

A professzionális minőségű és kedvező árú Granit termékekkel partnereink az optimális ár-érték arányú megoldást választják.

Raktárról

A katalógusban szereplő Granit termékek jelentős része raktárról azonnal elérhető. A speciális, rendelésre gyártott termékek szállítási határideje rövid.

Megoldás egyedi igényekre

Készen állunk egyedi igények kielégítésére, szakembereink megoldásokat kínálnak, termékösszetételeket ajánlanak és új termékeket fejlesztenek konkrét köszörülési feladatokra.

Kapcsolatfelvétel

Budapest HUNGARY
Fadrusz J. u. 2.
H-1194

+ 36 1 347-9830
ertekesites@granitabrasive.com
www.granitabrasive.hu

Mintabolt nyitvatartás:
H-P: 7:30-13:00

Beérkező áruk lerakása:
H-CS: 7:30-15:30
P: 7:30-13:30

A * jelölt rész kitöltése kötelező